The “Measurement Point Management” is a function to add and configure the Measuring Points.

1. User can choose the Group to configure the Measurement Points.
2. It shows the Measurement Points in the selected Group.
3. If the Measurement Point is online, it shows twinkled Green Dot. If it’s offline, it shows Red Dot.
4. The Measurement Point detail view shows
   1. Measurement ID
   2. RSSI and Battery status,
   3. Device details,
   4. Measured values from the Device.
   5. Alarm Schema

User can create / update / delete the Measurement Point if the User Permission is allowed.

1. Select the Device in the same Group.
2. (Optional) If the Device is Modbus Controller like UC100 model, required to choose the Modbus Channel.
3. Input the Measurement Point Name.
4. Choose Measured Parameter
   1. Temperature
   2. Humidity
   3. CO2
   4. Current
   5. On/Off (Swiftch)
   6. Virtual Value *
5. When Measured Parameter is selected, the default unit is filled, but User can edit the unit.
6. When Virtual Value is selected, User can input the formular to get the value from input variables. (T is temperature, RH is humidity, A is current, V is value.)
7. Select Alarm Schema (Optional)

<aside>

• When Virtual Value is selected, User can input the formular to get the value from input variables. (T is temperature, RH is humidity, A is current, V is value.)

</aside>