한장으로 끝내는 ProJet 3600 사용하기.pdf

MANUAL

Model name : MJP 3600

Introduction

• With MJP 3600, you can print your 3D model with a very high resolution. But consider that it may fail under brutal load.

Caution

• We are using HD option. so we cannot print parts below 32 micrometers. if your printout contains parts below 50micons, please inform that on the form.
• Since the maximum size that can be printed out using MJP is 298mmX185mmX203mm, please make sure your product size is smaller than these dimensions

How to request for using MJP

Advanced Printing Request

How to post-process

1. Take out steel plate from MJP printer.
2. Put steel plate in refrigerator about 5~10 minute.
   • Install spare plate in MJP printer. it is located on the top of refrigerator.
3. Take out steel plate from refrigerator.
4. Take out your printout from steel plate and put in the oven. DO NOT change the temperature.
   • Don't forget to clean steel plate after use.
   • Place steel plate on the top of refrigerator.