<aside> 🏷 *This document is for for JellyBOX-Marlin Firmware up to version jb-marlin-2.0, for firmware version jb-marlin-3.0 and newer, go here.

keywords: marlin, JellyBOX, lcd, controller, tree, menu, firmware, guide*

</aside>

Here you can find the descriptions of all the functions in your JellyBOX'es LDC menu. Enjoy!

JellyBOX Menu While NOT Printing

• Default screen = Info screen
• Home & Release The JellyBOX homes all axes (X→Y→Z) and then releases the motors so that the bed and the printhead can be moved by hand.
• Print adjustments
• Material
• Maintenance
• Settings
• Support
• Print from [an] SD card You select a gcode file from an inserted SD card and the JellyBOX will get on printing it. Folder structures are supported. Files with .gcode or .g extension are supported.

JellyBOX Menu While Printing

• Default screen = Info screen
• Live adjust Z Launches a live tweaking of the layer height. Turning the knob left brings the nozzle closer to the build plate. The end state is saved as the Z probe offset (accessible through the Settings as well). Info for the power users: this uses the Z Babystepping function in the background.
• Print adjustments (there are more options while printing)
• Support This is very useful when troubleshooting!
• Pause print The JellyBOX will pause the print, and park the print head. The print can be resumed!
• Stop print This will stop and cancel a running print. There's no resuming from this. ****