Please read the following instructions carefully before setting up the Aurender Music Player. •Be careful not to drop or mishandle the device to avoid internal damage. •Do not disassemble the device. •Do not expose device to oil, dust, water, high humidity, or smoke. •Keep the device in a well-ventilated area and ventilation openings free from obstruction. •When cleaning, use only a soft cloth. Keep out of contact with water or other liquids. •All servicing must be performed by a qualified technician, or the warranty will be voided. •Unplug power cord during severe lightning or when unused for a long period of time. •Unplug the device from the outlet only after completely turning off the unit. •Always turn the power off before connecting or disconnecting any cables. •Always make sure that the AC voltage matches the voltage stated in the rear panel mains inlet. •Ensure that the left and right speaker channels are properly connected to prevent reversed polarity. •Care must be taken not to short the speaker connections in order to prevent damage to the device.
• Place your device on a flat, horizontal, and stable surface. • Keep away from heat sources, such as radiators. • Do not stack other products on top of the Aurender. • Allow space around the device for ventilation. • Do not place inside an enclosed cabinet.
Power On/Off, Mute, Volume Up/Down, Previous, and Next can also be controlled by using the included remote control.
Volume can be adjusted from -96 dBFS to 0 dBFS in 0.5 dB increments with the initial factory setting being -60 dBFS.
When audio is played through the USB input, the LED light will turn white. When audio is being played through SPDIF input, the LED light will turn green. If the volume is adjusted using the remote control, then the LED light will flash intermittently.