"> "> ">

<html><head>
<meta name="cleanUrl" content="/manual/windows_eng" />
<meta name="keywords" content="shaks, game hub, gamepad, controller, app, application, turbo, calibration, update" />
</head></html>

CleanUrl: /manual/windows_eng

Content
Revision History

1. Download and installation

Please click here to download.
Unzip “SHAKS_Setup.zip” driver file

You will find these files and folders inside after unzip the downloaded file. Please select correct version x86 or x64.

Recently, it has become difficult to download the Xbox 360 controller driver download through the Microsoft homepage. If you absolutely need the Xbox 360 controller driver, please use the link below to download it.

Xbox 360 Controller Driver v1.2 for Windows 7 64-bit
Xbox 360 Controller Driver v1.2 for Windows 7 32-bit
For Windows 8 or later versions, you can install the Xbox 360 Controller Driver through Windows Update. You may need a little time to install.

2. SHAKS Utility installation.

If previous 1.x version is already installed, uninstall will be prompted.Uninstall old version first and re-run setup command.
The main setup window will open. Follow the installation process step by step

3. Register Gamepad

Put gamepad in "Win-MAC mode" before pairing via Bluetooth.
1. Change mode and power on
  - S2 series and S3 series: Turn on the power by pressing SHAKS logo button with pressing “Select” button. The SHAKS gamepad will remember last booting mode, you can re-connect "Win-MAC mode" by just turning on the power using SHAKS logo button.
  - S5 series: They has a dedicated switch for mode. So, move switch to Win-MAC mode and turn on the power by pressing SHAKS logo button.
2. Check LED
  - S2
  - S2i, S3 series, S5 series

<aside> 💡 If the SHAKS game pad is already registered as a Bluetooth device on a Windows PC with Android mode, the below behavior is required. Since the device type ID in “Android mode” and “Win-MAC mode” are different, two different devices cannot be registered sharing the same Bluetooth MAC. Proceed like the following

Remove SHAKS GamePad from Windows Bluetooth devices list.
Turn off and on the Bluetooth device or restart Windows.
Set gamepad to Windows Mode and pair it again with the computer.

</aside>

4. Run SHAKS Windows Utility

<aside> 💡 This program supports up to four SHAKS Gamepads.

</aside>

A. If SHAKS is not paired, pair SHAKS Gamepad through Bluetooth or push SHAKS button to awaken it.