Contains all of the components for the Playback System’s main content switcher system.
—
All of the SWITCHER’s “Settings,” except for the “Resolution,” are all set to bind and controllable on the Playback System’s Control UI Panel, so the settings can be controlled from either place, although the intention is to be controlled primarily with the Control UI Panel.
| Resolution | Set the output resolution. All projects will “Fit” to the specified resolution. |
|---|---|
| Kinect Device | Select the Kinect sensor device being used: Kinect v2 or Kinect Azure. |
| Next Project | Select the next project. |
| Title Card | On: Displays title cards before transitioning into the project. |
| Off: Fades to black in between projects without displaying any title cards. | |
| Title Card Length (Seconds) | The number of seconds the title card stays on display, starting from when the title card is fully faded on until it begins to fade off. |
| Fade Transition Length | The number of seconds the fade transition lasts, starting from the beginning of the fade out until the end of the fade up. |
| Transition | Triggers the transition to the next project |
| Auto-Next | When in Auto Mode, trigger the next project in the playlist. |
—
All of the SWITCHER’s “Auto-Play” settings are all set to bind and controllable on the right side of the Playback System’s Control UI Panel as the Auto Mode’s playlist, so the settings can be controlled from either place, although the intention is to be controlled primarily with the Control UI Panel.
