If any questions, contact us https://shaks.channel.io/
SHAKS S2/S3/S5 supporting four (4) modes, Android / Windows / iOS, and Mapping, each mode of which is recognized as an individual device by its corresponding host game device. For example, when SHAKS is in android mode, it will connect to your android smartphone/tablet, it works like an “android Gamepad”. But, if you connect it to a windows PC, it does not work correctly (for example, haptic no function), because SHAKS says “I am in android mode”, but the PC can’t hear it, although its Bluetooth connection is made.
First, please note that the gamepad can be paired to one device with an exactly matched mode. It is auto re-pair to the same device once paired, but If you wish to switch from one device to another, please delete previously log data from your device to de-activate its automatic repairing feature, do the pairing process again.
S2 is supporting android, Windows PC, Notebook, iPhone, iPad, Apple TV, Android Phone. Please select a mode-matching your device. And check your service to play!
It is compatible with down-load gaming, Steam Epic Games, and most major cloud game service such as Stadia, X-cloud, Geforce, Luna.
One step more, by our own SHAKS GameHub app, S2 lets you play AAA touch-gaming by console grade controller, name a few, Garena Free Fire, CoD, PUBG, Genshin Impact, Roblox, Slamdunk, etc.
<aside> 💡 Note) Please select the proper mode matching to your device for 100% compatibility according to each protocol. Otherwise, some feature is not supported fully although it looks like connected!
Please note the name of each button/key name and LED indication status.
LED #1,2 shows connection and battery charging status and LED #3,4 shows gamepad mode.
Mode change can be done by pressing the "Select+LB" button or "hotkey". Please the LED indication in the below table. The mode will change sequentially from Android→Windows/Mac→ iOS→ Android Mapping. Click to Video
3 Step setup: In power-off status, press two keys simultaneously until booting. This setup is available from xxx 12 (Dec. 21, 2020) firmware. If you have an older version, please upgrade it via the SHAKS Gamehub app. See below how to do 3 step setup.
Find gamepad mode for your device in the table
Change the mode of the gamepad by key or press “Hot Key ”* The default is Android mode. S2 remember the last selected mode until you change it.
Press the 'Select + Start' button for more than 3 seconds and find ‘SHAKS S2 xxxx ’ on the device & click to pair.