Package includes

• Piggy Keyboard (top case, bottom case, inner frame, weight)
• Plate
• PCB, USB daughterboard, Daughterboard JST cable
• Thin gaskets for top case, thick gaskets for inner frame, side gaskets
• Plate foam (between the plate and PCB)
• Case foam (between the PCB and bottom case)
• Thin feet (by default for the base kit)
• Screws

What you need to build

• Switches
• PCB mount stabilizers, you will need 1 * 7u + 2 * 2u stabs for hotswap PCB or 1* 6.25/7u + 2~4 * 2u stabs for solder PCB
• Keycaps
• USB-C Cable
• Soldering kit (only for solder PCB)
• Screwdrivers

Before start

• Check the condition of the product within 10 days of receiving your package, if you find any visible defects on the external surface, please contact jacky#8508. After 10 days, no replacement will be offered.

• Connect and test your PCB using tweezers (Piggy PCB supports QMK / VIA). If PCB is faulty, please contact us immediately instead of building it

  • If you haven’t downloaded VIA before, here is where you can find VIA to download

  Release 1.3.1 · the-via/releases

  • Open VIA, and if you don’t have “Design” tab yet, go to “Settings” tab to enable it

  

  • Go to “Design” tab and load the following JSON file for your PCB in VIA:

    PIGGY60_hotswap.json

    PIGGY60_solder.json

  

  

  • Now you can go to “Key Tester” tab and check “Test Matrix” to test your PCB

  • (Optional) If you need to re-flash your PCB with QMK toolbox (e.g. you want brighter RGB under-glow for your PC case), here are the hex files that you may need:

    piggy60_hs.hex

    piggy60_solder.hex