The sensing object should move in-between the sensor and reflector

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/74535183-7aa1-48ef-9b53-659f3eecc351/Untitled.png

Assemble mounting accessories to sensor

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/ed645a65-f07b-4a84-a036-f9f06f4cfec7/Untitled.png

Place reflector and align sensor at 90 degrees - sensor looking straight to reflector.

Note: Sensor can be mounted either horizontally or vertically.

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/2f40a3db-c147-4a1e-b087-d3e10916935e/Untitled.png

Position sensor and reflector tightly.

For testing - there is a orange LED on the sensor and it must be ON when there is nothing between the sensor and reflector. By moving hand or product between the sensor and reflector led should turn off

NB! In case the sensor LED is flickering then try to adjust the sensor angle or reflector. Or move the reflector closer to the sensor. The LED should be constatly ON when no product is detected by the beam

Connect M8 cable to sensor

Bring cable from sensor to BlackBox

Cable installation for any sensor type