Set Up Samsung Wireless Printer –

Have you just bought a wireless Samsung printer? You must be thinking of ways to solve the ‘How To Setup My Samsung Wireless Printer To My Laptop’ question. Some of the easiest methods have been described here in brief. The set up is usually completed within few minutes.

Samsung Printer Hardware Setup –

Before you start off with the ‘How To Setup My Samsung Wireless Printer To My Laptop’ process, complete the hardware setup.

· Take the plastic packaging off the printer.

· Open the ink cartridge access door and remove the film off the scanner.

· Next, take out the ink or toner cartridge and move it back and forth in your hands. This will help the toner or ink spread evenly throughout the cartridge. If you skip this step, the quality of the print would not be satisfactory.

· Put the cartridge back in and close the cartridge access door.

· Open the paper tray and put it out as far as you can.

· Place the pages according to what the guide on the bottom tray indicates. Close the tray afterwards.

· Bring out the power cable and plug one end into the printer and the other into the power port. Turn on the switch.

· Press and hold the power push button on the printer.

· Release the power push button when you see the power LED lit.

The printer is now ready to be connected to the laptop. Although the Samsung printer is wireless and can be used with the laptop from far away too, try placing the printer a little closer still. The further you place you Samsung wireless printer from the laptop, the more distorted the signal will be. Keep in mind the fact that gadgets tend to distort or weaken wireless signal. Place the printer closer to the router too.

Printer Connected To The Laptop Using The USB Cable –

· Open the Samsung Easy Printer Manager.

· From the tab on the top of the screen, select the ‘Switch to advanced mode’ feature.

· Choose you printer and click the ‘Device setting’ tab.