Please read carefully before proceeding!

Installation (Non-DFE) — New Grewal’s DT

Requirements

• Firmware: Fw 2.0.202 (available HERE)
• Recovery: Use Derp Recovery (available HERE)
• Files (Might) Needed: Grewal’s Prebuilt files — dtbo, init_boot, vendor_boot, and boot (available HERE)

Steps

1. Boot into Fastboot Mode

2. Flash Firmware 2.0.202

3. Flash all Grewal‘s prebuilt files (you can skip this if you are already on a rom that is based on new DT)

   fastboot flash dtbo dtbo.img
   fastboot flash init_boot init_boot.img
   fastboot flash vendor_boot vendor_boot.img
   fastboot flash boot boot.img
   
   

4. Reboot into Recovery

5. Sideload the ROM

6. Wipe data

7. Reboot to System

Installation (With DFE) — New Grewal’s DT + TWRP Method

Step