1. From Start menu, type services in to the search bar. Run Services

en1.png

  1. a. Scroll down to Wired Autoconfig. Right-click Wired Autoconfig and b. Choose properties

    en2.png

  2. From Wired AutoConfigegenskaper (Local Computer) dialog box a. Choose Automatic from Startup type b. Press Start c. Press Apply d. Press OK.

en3.png

  1. From Start menu, type ncpa.cpl in to the search bar. Run ncpa.cpl

en4.png

  1. Right-click on Local Connection Choose properties

    en5.png

  2. Click on Authentication and choose Settings

en6.png

  1. Check off Verify the server's indentity by validating the certificate and press Configure

en7.png

  1. Make sure that Automatically use my Windows log-on name and password is not activated

en8.png

  1. Make sure that Enable IEEE 802.1X authentication is enabled and then choose Additional Settings

en9.png

a. Make sure that Specify authentication mode box is activated

b. From menu choose User authentication

c. Then choose Save credentials if you wish for that, if not you have to type your credentials each time.

en10.png

  1. Type in your student number Exampel: [email protected] and password Then press OK and OK in the previous dialog box

en11.png