END USER LICENSE AGREEMENT - READ BEFORE INSTALLING
ALLIED BIM, LLC (“ALLIED BIM”) FABRICATION DESKTOP SOFTWARE END-USER LICENSE AGREEMENT (EULA)
CAUTIONS - READ THIS CAREFULLY - DO NOT PROCEED TO USE THIS PROGRAM OR UPDATE IF YOU DO NOT AGREE TO EACH AND EVERY PROVISION OF THIS LICENSE AGREEMENT. USERS ACKNOWLEDGE THAT THEY HAVE THE EXPRESS PERMISSION TO AGREE AND BIND THEMSELVES, THEIR COMPANY OR LEGAL ENTITY TO ALL TERMS AND CONDITIONS OF THIS EULA. IF YOU DO NOT FULLY CONSENT TO THE TERMS AND CONDITIONS OF THIS LICENSE, THEN THE PROGRAM MUST BE REMOVED FROM YOUR COMPUTER, AND NO FURTHER USE IS AUTHORIZED OR PERMITTED BY ALLIED BIM.
The term "You" refers to you personally, your company, the company or legal entity you work for or are affiliated with, whether as an independent contractor, employee, partner, shareholder, officer, director or computer consultant.
YOU MUST HAVE A CONNECTION TO THE INTERNET AND A CURRENT INTERNET BROWSER TO USE THIS PRODUCT. ALLIED BIM IS NOT AN INTERNET SERVICE PROVIDER AND DOES NOT OFFER YOU INTERNET CONNECTIVITY.
YOU EITHER PURCHASED A ONE-YEAR OR MONTH-TO-MONTH SUBSCRIPTION SERVICE OR DOWNLOADED A DEMONSTRATION VERSION OF FABRICATION DESKTOP FOR A TRIAL EVALUATION PERIOD. EACH VERSION’S PERIOD OF ACTIVATION BEGINS ON THE FIRST ACTIVATION OF ANY LICENSE INSTALLED ON THE FIRST COMPUTER. IF YOU INSTALL ON ANOTHER COMPUTER AT A LATER DATE, THE EFFECTIVE DATE WILL STILL BE THE DATE OF FIRST ACTIVATION. ONCE YOUR SUBSCRIPTION OR TRIAL PERIOD ENDS, YOU WILL NOT BE ABLE TO RUN THE PROGRAM UNLESS YOU RENEW OR PURCHASE.
You may install this software on more than one computer but may not operate more than one instance at a time. If you attempt to operate more than a single instance at the same time, the subsequently invoked instance will not operate. This software shall not be installed on a network; however, your data may be saved to a network computer.
FABRICATION DESKTOP software is delivered via a secure website and is downloaded for either a trial or after-purchase authorization. Once downloaded, you will receive an email with a trial or subscription authorization code. The software is activated by entry of the code.
This software product is licensed on a subscription basis, not sold. You may not copy, modify, alter, reverse engineer, disassemble, recompile or decompile FABRICATION DESKTOP software. Any attempt to do this will result in an immediate breach of the terms and conditions herein. You may not allow or permit any third party to modify, copy, reproduce, republish, upload, post, distribute in any way, create a derivative work of, reverse engineer, reverse assemble, or otherwise attempt to discover any source code for any material in this software.
The software contained is owned exclusively by ALLIED BIM and is protected by both common law copyright laws and United States Copyright laws and is not meant for export outside the United States. No license, express or implied, is granted for such exporting. FABRICATION DESKTOP software (including any images, “applets,” photographs, animations, video, audio, music and text incorporated into the software) and any accompanying written materials (the “Documentation”) are owned by ALLIED BIM, are protected by United States copyright laws and international treaties, and contain confidential information and trade secrets. Any suggestions you may make regarding the software functions or capabilities become the property of ALLIED BIM, whether or not such suggestions are incorporated into the software, and you hereby assign to ALLIED BIM your intellectual property rights, if any, to all such suggestions. ALLIED BIM has the sole right to sell or transfer its copyright of this program at any time at its discretion.
NOTICE TO NEW & UPGRADING PROFESSIONAL USERS: If you need an additional license because you change or buy new computers or reformat your hard drive or get a virus that corrupts your computer or programs, there is a fee of $100.00 for a new license ID. There are no exceptions to this policy.
In no event shall ALLIED BIM or its officers, directors, EMPLOYEES, suppliers, distributors, programmers, developers or agents be liable for any SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT damages whatsoever, WHETHER for personal injury, PROPERTY DAMAGE, loss of business profits, business interruption, loss of business information, or any other pecuniary loss arising out of the use of or inability to use this product, even if ALLIED BIM has been advised of the possibility of such damages. Some states or jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages; the above limitation may not apply to you. In any case, ALLIED BIM and its suppliers’ entire liability under any provision of this agreement shall be limited to the amount actually paid by you for the FABRICATION DESKTOP software. ALLIED BIM does not warrant compatibility with any specific or generic computer. Any problems or defects should be reported to ALLIED BIM’s email at [email protected]. No fee or remuneration shall be paid for the reporting of any errors in this program.
FABRICATION DESKTOP is designed to provide accurate and authoritative information in regard to the subject covered. Every reasonable effort has been made to ensure the accuracy of the information within the included data; however, the ultimate responsibility for accuracy lies with the user. ALLIED BIM, its employees, agents and staff, make no representation, guarantee or warranty, expressed or implied, that this software and data are error-free or that the use of this software will prevent differences of opinion or disputes with any party, and will bear no responsibility for the results or consequences of its use.
In case disputes arise, resolution shall be achieved through the process of arbitration. Unless otherwise agreed, the arbitration shall be conducted in Bozeman, Montana, in accordance with the then current Arbitration Rules of the American Arbitration Association. The arbitrators shall apply the law of the state of Montana. The arbitration shall be held before a single arbitrator unless otherwise agreed by the parties. If an arbitration is commenced, the parties agree to permit discovery proceedings of the type provided by the Montana Rules of Civil Procedure, both in advance of and during recesses of the arbitration hearings. It is specifically agreed that in the event of arbitration, the parties shall meet and endeavor to agree upon an individual to serve as arbitrator. If the parties are unable to agree upon an arbitrator, the American Arbitration Association shall be requested to supply the names of five (5) qualified and experienced arbitrators. The parties shall alternately strike the names of the proposed arbitrators until one remains. The person whose name remains shall be the arbitrator. If an arbitration award is made in favor of ALLIED BIM, then you shall be liable for all costs, expenses and legal fees.
This License Agreement, the License granted hereunder, and FABRICATION DESKTOP software may not be assigned or in any way transferred without the prior written consent of ALLIED BIM This Agreement and its performance and all claims arising from the relationship between the parties contemplated herein shall be governed by, construed and enforced in accordance with the laws of the State of Montana without regard to conflict of laws principles thereof. Failure of a party to enforce any provision of this Agreement shall not constitute or be construed as a waiver of such provision or of the right to enforce such provision. If YOU fail to comply with any term of this License, YOUR LICENSE IS AUTOMATICALLY TERMINATED.
ALLIED BIM reserves the right to change this licensing agreement at any time. The current version of this agreement shall be posted at all times at https://www.alliedbim.com/agreements.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, YOU UNDERSTAND THIS AGREEMENT, AND YOU UNDERSTAND THAT BY LOGGING INTO, DOWNLOADING AND/OR RUNNING THE SOFTWARE, OR BY PLACING OR COPYING THE SOFTWARE ONTO YOUR COMPUTER HARD DRIVE, YOU AGREE TO BE BOUND BY THIS AGREEMENT’S TERMS AND CONDITIONS. YOU FURTHER AGREE THAT, EXCEPT FOR SEPARATE WRITTEN AGREEMENTS, IF ANY, BETWEEN ALLIED BIM AND YOU SIGNED BY BOTH ALLIED BIM AND YOU, THIS AGREEMENT IS A COMPLETE AND EXCLUSIVE STATEMENT OF THE RIGHTS AND LIABILITIES OF THE PARTIES.
ALLIED BIM, LLC SOFTWARE AS A SERVICE AGREEMENT
IMPORTANT-READ THIS ALLIED BIM SOFTWARE AS A SERVICE AGREEMENT (THIS “AGREEMENT”) CAREFULLY BEFORE CONTINUING REGISTRATION. BY CLICKING THE "I ACCEPT" BUTTON OR OTHERWISE ACCEPTING THIS AGREEMENT THROUGH AN ORDERING DOCUMENT THAT INCORPORATES THIS AGREEMENT (THE “ORDERING DOCUMENT”), YOU AGREE TO FOLLOW AND BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU ARE ENTERING INTO THIS AGREEMENT ON BEHALF OF A COMPANY OR OTHER LEGAL ENTITY, YOU REPRESENT THAT YOU HAVE THE AUTHORITY TO BIND SUCH ENTITY TO THE TERMS AND CONDITIONS OF THIS AGREEMENT AND, IN SUCH EVENT, “YOU” AND “YOUR” AS USED IN THIS AGREEMENT SHALL REFER TO SUCH ENTITY, IF YOU DO NOT HAVE SUCH AUTHORITY, OR IF YOU DO NOT AGREE TO ALL THE TERMS AND CONDITIONS IN THIS AGREEMENT, YOU MUST SELECT THE "I DECLINE" BUTTON AND MAY NOT USE THE SERVICES. A. Agreement Definitions “You” and “your” refers to the individual or entity that has ordered software as a service from ALLIED BIM America, Inc. (“ALLIED BIM”) or an authorized distributor by executing the ordering document that accompanies and incorporates this ALLIED BIM software as a service agreement (collectively, the “agreement”). Software as a service consists of system administration, system management, and system monitoring activities that ALLIED BIM performs for ALLIED BIM programs, and includes the right to use the ALLIED BIM programs, support services for such ALLIED BIM programs, as well as any other services provided by ALLIED BIM, as defined in the ordering document (collectively, the “services”). The term “program documentation” refers to the program user manual as well as any other materials provided by ALLIED BIM as part of the services. The term “ALLIED BIM programs” refers to the software products owned or distributed by ALLIED BIM to which ALLIED BIM grants you access as part of the services, including program documentation, and any program updates provided as part of the services. The term “users” shall mean those individuals authorized by you or on your behalf to use the services, as defined in the ordering document. The term “your data” refers to the data provided by you that resides in your services environment. The term “ordering document” refers to the ordering document signed by the parties that accompanies and incorporates this software as a service agreement, including the services policies and any other document referenced or incorporated into the ordering document. B. Applicability of Agreement This software as a service agreement is valid for the ordering document which this agreement accompanies. C. Rights Granted Upon ALLIED BIM’s acceptance of your order and for the duration of the services term defined in the ordering document, you have the nonexclusive, non-assignable, royalty free, worldwide limited right to use the services solely for your internal business operations and subject to the terms of the agreement. You may allow your users to use the services for this purpose and you are responsible for your users’ compliance with the agreement. The services are provided as described in, and subject to, the services policies referenced in the ordering document. You acknowledge that ALLIED BIM has no delivery obligation and will not ship copies of the ALLIED BIM programs to you as part of the services. You agree that you do not acquire under the agreement any license to use the ALLIED BIM programs specified in the ordering document in excess of the scope and/or duration of the services. Upon the end of the agreement or the services thereunder, your right to access or use the ALLIED BIM programs specified in the ordering document and the services shall terminate. D. Ownership and Restrictions You retain all ownership and intellectual property rights in and to your data. ALLIED BIM or its licensors retain all ownership and intellectual property rights to the services and ALLIED BIM programs. ALLIED BIM retains all ownership and intellectual property rights to anything developed and delivered under the agreement. Third party technology that may be appropriate or necessary for use with some ALLIED BIM programs is specified in the program documentation or ordering document as applicable. Your right to use such third party technology is governed by the terms of the third party technology license agreement specified by ALLIED BIM and not under the agreement. You may not: • remove or modify any program markings or any notice of ALLIED BIM’s or its licensors’ proprietary rights; • make the programs or materials resulting from the services available in any manner to any third party for use in the third party’s business operations (unless such access is expressly permitted for the specific program license or materials from the services you have acquired); • modify, make derivative works of, disassemble, reverse compile, or reverse engineer any part of the services (the foregoing prohibition includes but is not limited to review of data structures or similar materials produced by programs), or access or use the services in order to build or support, and/or assist a third party in building or supporting, products or services competitive to ALLIED BIM; • disclose results of any services or program benchmark tests without ALLIED BIM’s prior written consent; and • license, sell, rent, lease, transfer, assign, distribute, display, host, outsource, disclose, permit timesharing or service bureau use, or otherwise commercially exploit or make the services, ALLIED BIM programs or materials available, to any third party other than, as expressly permitted under the terms of the agreement. The rights granted to you under the agreement are also conditioned on the following: • the rights of any user licensed to use the services (e.g., on a “named user” basis) cannot be shared or used by more than one individual (unless such license is reassigned in its entirety to another authorized user, in which case the prior authorized user shall no longer have any right to access or use the license); • except as expressly provided herein, no part of the services may be copied, reproduced, distributed, republished, downloaded, displayed, posted or transmitted in any form or by any means, including but not limited to electronic, mechanical, photocopying, recording, or other means; and • you agree to make every reasonable effort to prevent unauthorized third parties from accessing the services. E. Warranties, Disclaimers and Exclusive Remedies ALLIED BIM warrants that the services will perform in all material respects in accordance with the services policies referenced in the ordering document. If the services provided to you for any given month during the services term were not performed as warranted, you must provide written notice to ALLIED BIM as specified in the ordering document no later than five business days after the last day of that particular month or within such other period stated in the ordering document. ALLIED BIM DOES NOT GUARANTEE THAT THE SERVICES WILL BE PERFORMED ERROR-FREE OR UNINTERRUPTED, OR THAT ALLIED BIM WILL CORRECT ALL SERVICES ERRORS. YOU ACKNOWLEDGE THAT ALLIED BIM DOES NOT CONTROL THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE SERVICE MAY BE SUBJECT TO LIMITATIONS, DELAYS, AND OTHER PROBLEMS INHERENT IN THE USE OF SUCH COMMUNICATIONS FACILITIES. ALLIED BIM IS NOT RESPONSIBLE FOR ANY DELAYS, DELIVERY FAILURES, OR OTHER DAMAGE RESULTING FROM SUCH PROBLEMS. FOR ANY BREACH OF THE ABOVE WARRANTIES, ALLIED BIM WILL REMIT A SERVICES FEE CREDIT TO YOU CALCULATED AT TEN PERCENT (10%) OF NET MONTHLY FEES FOR THE APPLICABLE SERVICES FOR THE MONTH IN WHICH THE BREACH OCCURRED. THE CREDIT WILL BE PROVIDED ONLY TOWARDS ANY OUTSTANDING BALANCE FOR SERVICES OWED TO ALLIED BIM, AND THE REMITTANCE OF SUCH CREDIT WILL REPRESENT YOUR EXCLUSIVE REMEDY, AND ALLIED BIM’S SOLE LIABILITY, FOR ALL BREACHES OF ANY WARRANTY SPECIFIED IN THE AGREEMENT. TO THE EXTENT NOT PROHIBITED BY LAW, THESE WARRANTIES ARE EXCLUSIVE AND THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS INCLUDING FOR HARDWARE, SYSTEMS, NETWORKS OR ENVIRONMENTS OR FOR MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. F. Trial Use of the Services If specified in the ordering document, you may order certain services for trial, nonproduction purposes subject to the terms and conditions of the agreement. Services acquired for trial purposes are provided “as is” and ALLIED BIM does not offer any warranties for such services. G. Indemnification If a third party makes a claim against either you or ALLIED BIM (“Recipient” which may refer to you or ALLIED BIM depending upon which party received the Material), that any information, design, specification, instruction, software, service, data, or material (“Material”) furnished by either you or ALLIED BIM (“Provider” which may refer to you or ALLIED BIM depending on which party provided the Material), and used by the Recipient infringes its intellectual property rights, the Provider, at its sole cost and expense, will defend the Recipient against the claim and indemnify the Recipient from the damages, liabilities, costs and expenses awarded by the court to the third party claiming infringement or the settlement agreed to by the Provider, if the Recipient does the following: • notifies the Provider promptly in writing, not later than 30 days after the Recipient receives notice of the claim (or sooner if required by applicable law); • gives the Provider sole control of the defense and any settlement negotiations; and • gives the Provider the information, authority, and assistance the Provider needs to defend against or settle the claim. If the Provider believes or it is determined that any of the Material may have violated a third party’s intellectual property rights, the Provider may choose to either modify the Material to be non-infringing (while substantially preserving its utility or functionality) or obtain a license to allow for continued use, or if these alternatives are not commercially reasonable, the Provider may end the license for, and require return of, the applicable Material and refund any unused, prepaid fees the Recipient may have paid to the other party for such Material. If such return materially affects ALLIED BIM’s ability to meet its obligations under the relevant order, then ALLIED BIM may, at its option and upon 30 days prior written notice, terminate the order. The Provider will not indemnify the Recipient if the Recipient alters the Material or uses it outside the scope of use identified in the Provider’s user documentation or services policies or if the Recipient uses a version of the Materials which has been superseded, if the infringement claim could have been avoided by using an unaltered current version of the Material which was provided to the Recipient. The Provider will not indemnify the Recipient to the extent that an infringement claim is based upon (i) any information, design, specification, instruction, software, data, or material not furnished by the Provider, or (ii) any Material from a third party portal or other external source that is accessible to you within or from the service (e.g., a third party Web page accessed via a hyperlink). ALLIED BIM will not indemnify you to the extent that an infringement claim is based upon the combination of any Material with any products or services not provided by ALLIED BIM. ALLIED BIM will not indemnify you for infringement caused by your actions against any third party if the services as delivered to you and used in accordance with the terms of the agreement would not otherwise infringe any third party intellectual property rights. ALLIED BIM will not indemnify you for any infringement claim that is based on: (1) a patent that you were made aware of prior to the effective date of the agreement (pursuant to a claim, demand, or notice); or (2) your actions prior to the effective date of the agreement. This section provides the parties’ exclusive remedy for any infringement claims or damages. H. Support Services Support services provided under the agreement are specified in the services policies referenced in the ordering document. I. End of Agreement Services provided under this software as a service agreement shall be provided for the period defined in the ordering document unless earlier terminated in accordance with the agreement. The term of the services and any renewal years are collectively defined as the “services term.” At the end of the services term, all rights to access or use the services, including the ALLIED BIM programs listed in the ordering document, shall end. If either of us breaches a material term of the agreement and fails to correct the breach within 30 days of written specification of the breach, then the breaching party is in default and the non-breaching party may terminate the applicable ordering document under which the breach occurred. If ALLIED BIM ends the ordering document as specified in the preceding sentence, you must pay within 30 days all amounts which have accrued prior to such end, as well as all sums remaining unpaid for the services ordered under the agreement plus related taxes and expenses. If ALLIED BIM ends the services under the Indemnification section, you must pay within 30 days all amounts remaining unpaid for services plus related taxes and expenses. The nonbreaching party may agree in its sole discretion to extend the 30 day period for so long as the breaching party continues reasonable efforts to cure the breach. You agree that if you are in default under the agreement, you may not use the services ordered. In addition, ALLIED BIM may immediately suspend your password, account, and access to or use of the services (i) if you fail to pay ALLIED BIM as required under the agreement and do not cure within the first ten days of the 30 day cure period, or (ii) if you violate any provision within sections C, D, N or R of this software as a service agreement. ALLIED BIM may terminate the services hereunder if any of the foregoing is not cured within 30 days after ALLIED BIM’s initial notice thereof. Any suspension by ALLIED BIM of the services under this paragraph shall not excuse you from your obligation to make payment(s) under the agreement. At your request, and for a period of up to 60 days after the termination of the applicable ordering document, ALLIED BIM may permit you to access the services solely to the extent necessary for you to retrieve a file of your data then in the services environment. You agree and acknowledge that ALLIED BIM has no obligation to retain your data and that your data may be irretrievably deleted after 60 days following the termination of the ordering document. Provisions that survive termination or expiration of the agreement are those relating to limitation of liability, infringement indemnity, payment, and others which by their nature are intended to survive. J. Fees and Taxes You agree to pay for all services ordered as set forth in the applicable ordering document. All fees due under the agreement are non-cancelable and the sums paid nonrefundable. You agree to pay any sales, value-added or other similar taxes imposed by applicable law that ALLIED BIM must pay based on the services you ordered, except for taxes based on ALLIED BIM’s income. You will reimburse ALLIED BIM for reasonable expenses related to providing any on-site portion of the services. Fees for services listed in an ordering document are exclusive of taxes and expenses. All amounts invoiced hereunder are due and payable within 30 days of the date of the invoice. You agree that you have not relied on the future availability of any services, programs or updates in entering into the payment obligations in the ordering document; however, the preceding does not relieve ALLIED BIM of its obligation to deliver services that you have ordered per the terms of the agreement. K. Nondisclosure By virtue of the agreement, the parties may have access to information that is confidential to one another (“confidential information”). We each agree to disclose only information that is required for the performance of obligations under the agreement. Confidential information shall be limited to the terms and pricing under the agreement, your data residing in the services environment, and all information clearly identified as confidential at the time of disclosure. A party’s confidential information shall not include information that: (a) is or becomes a part of the public domain through no act or omission of the other party; (b) was in the other party’s lawful possession prior to the disclosure and had not been obtained by the other party either directly or indirectly from the disclosing party; (c) is lawfully disclosed to the other party by a third party without restriction on the disclosure; or (d) is independently developed by the other party. We each agree to hold each other’s confidential information in confidence for a period of three years from the date of disclosure. Also, we each agree to disclose confidential information only to those employees or agents who are required to protect it against unauthorized disclosure in a manner no less protective than under the agreement. ALLIED BIM will protect the confidentiality of your data residing in the services environment in accordance with the ALLIED BIM security practices specified in the services policies referenced in the ordering document. Nothing shall prevent either party from disclosing the terms or pricing under the agreement in any legal proceeding arising from or in connection with the agreement or from disclosing the confidential information to a governmental entity as required by law. L. Entire Agreement You agree that the agreement (including the information which is incorporated into the agreement by written reference (including reference to information contained in a URL or referenced policy), is the complete agreement for the services ordered by you, and that the agreement supersedes all prior or contemporaneous agreements or representations, written or oral, regarding such services. If any term of the agreement is found to be invalid or unenforceable, the remaining provisions will remain effective and such term shall be replaced with a term consistent with the purpose and intent of the agreement. It is expressly agreed that the terms of the agreement, including any ALLIED BIM ordering document, shall supersede the terms in any purchase order or other non-ALLIED BIM document and no terms included in any such purchase order or other non-ALLIED BIM document shall apply to the services ordered. The agreement may not be modified and the rights and restrictions may not be altered or waived except in a writing signed or accepted online through the ALLIED BIM Store by authorized representatives of you and of ALLIED BIM. M. Limitation of Liability NEITHER PARTY SHALL BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, OR ANY LOSS OF REVENUE OR PROFITS (EXCLUDING FEES UNDER THE AGREEMENT), DATA, OR DATA USE. ALLIED BIM’S MAXIMUM LIABILITY FOR ANY DAMAGES ARISING OUT OF OR RELATED TO THIS SOFTWARE AS A SERVICE AGREEMENT OR YOUR ORDER, WHETHER IN CONTRACT OR TORT, OR OTHERWISE, SHALL IN NO EVENT EXCEED, IN THE AGGREGATE, THE TOTAL AMOUNTS ACTUALLY PAID TO ALLIED BIM FOR THE SERVICES UNDER THE ORDER THAT IS THE SUBJECT OF THE CLAIM IN THE TWELVE (12) MONTH PERIOD IMMEDIATELY PRECEDING THE EVENT GIVING RISE TO SUCH CLAIM. ANY DAMAGE IN YOUR FAVOR AGAINST ALLIED BIM SHALL BE REDUCED BY ANY REFUND OR CREDIT RECEIVED BY YOU UNDER THE AGREEMENT AND ANY SUCH REFUND AND CREDIT SHALL APPLY TOWARDS THE LIMITATION OF LIABILITY. N. Export Export laws and regulations of the United States and any other relevant local export laws and regulations apply to the services. You agree that such export control laws govern your use of the services (including technical data) and any services deliverables provided under this agreement, and you agree to comply with all such export laws and regulations (including “deemed export” and “deemed re-export” regulations). You agree that no data, information, software programs and/or materials resulting from services (or direct product thereof) will be exported, directly or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation, or development of missile technology. O. Other