Hardware requirements:

ScanCenter looking for devices named Arduino UNO or CH340 \ CH341

Table sketch requirements:

1. Sends 'ts' or 'tl' on serial port start
2. Get serial command m1000,50 where 1000 - number of steps(generated by our software after axis evaluation), 50 - speed (preset)
3. Sends 'mstart' when starts rotation
4. Sends 'mend' when finishes rotation

Samples

DFRobot driver

Code

TL30.ino

Library

StepperDFRobot.zip

28BYJ48 motor +driver

Code

TS12.ino

Library

Stepper_28BYJ48.zip