Update the Anker App to the latest version via the App Store or Google Play.
The latest version：V3.18.0
Purpose: Check device status to ensure the device is powered on and connected to the internet.
1、The device must be powered on and in a networked state
2、If the device is not connected to WiFi or the signal is weak, follow these steps to configure WiFi
3、For other issues, refer to the User Manual: https://support.ankersolix.com/s/articlemanual?pn=A5103B&utm_source=qrcode&utm_medium=psg#_idTextAnchor001
Purpose: Ensure the device firmware is upgraded to the specified version.
Follow the App instructions to upgrade to the specified version
1、Firmware version:
Three phase $1.0.13.12$
Single phase $1.0.15.11$
1、Before running the smart mode, you need to configure your electricity rate plan according to your actual pricing situation.
2、If you have signed a TOU tariff, please refer to this operating guide:
a、TOU Tariff Configuration Video – this video includes a complete step-by-step guide to configuring the TOU tariff.
b、Explanation of TOU Tariff – you need to configure your TOU tariff based on your actual electricity bill.
i、Super Off-Peak：The lowest electricity rate period, if TOU mode is enabled, charging will only occur within this time frame.
ii、Off-Peak：Lower electricity price time slot
iii、Mid-Peak：Medium electricity price time slot
iv、Peak：Peak electricity price time slot
v、Price entry rules: Super Off-Peak ＜ Off-Peak ＜ Mid-Peak ＜ Peak
3、If you have signed a dynamic electricity pricing contract, please refer to this operating guide:
This article takes users of Eneco in the Netherlands as an example.
a、Dynamic Electricity Pricing (Buy and Sell Prices) — Complete Setup Video. You can complete the dynamic electricity pricing setup by following the configuration video.
ScreenRecording_04-02-2026 14-56-52_1.MP4
b、Before setting up the dynamic electricity pricing, you need to enter your country, address, and postal code.
c、Points to Note for Use
i、If the electricity retailer you choose supports account login, you can directly enter the corresponding retailer’s account and password and get the electricity price.
ii、If the electricity retailer you choose doesn’t support account login, or the electricity price cannot be retrieved by directly entering the corresponding retailer’s account and password, you can click "Set tariff manually" below to configure the price manually.
iii、When your electricity retailer is connected via the Dynamic Tariff method, you can enter the corresponding fee and VAT provided by the retailer here.
ScreenRecording_04-02-2026 14-58-11_1.MP4
Purchase electricity price settings: Set the retailer providing the purchase electricity price in the Energy supplier (Buying)
Setting buying price:
The formula for Buying Price=(Market Price+Fee)×(1+VAT)
1.Please fill in the 'Fee' and 'VAT' according to the formula above to ensure that the calculated buying price matches your actual buying price.
2.The 'Fee' should be entered excluding VAT. If your buying price includes additional costs that are not subject to VAT, please convert them according to the formula above and include them in the 'Fee' value.
iv、Sale electricity price settings: Set the retailer providing the sale electricity price in the Energy supplier (Selling). If you have a sale electricity price contract, you need to select your Energy supplier (Selling) again here. If you do not have a contract, it is not necessary to enter this information.
Setting selling price:
The formula for Selling Price=(Market Price–Fee)×(1–VAT)
1.Please fill in the 'Fee' and 'VAT' according to the formula above to ensure that the calculated selling price matches your actual selling price.
2.The 'Fee' should be entered excluding VAT. If your selling price includes additional costs that are not subject to VAT, please convert them according to the formula above and include them in the 'Fee' value.
3.If your electricity supplier calculates the selling price as Market Price+Fee+VAT, please enter a negative value instead of a positive one below.
