💻 Course Website
📖 Textbook Supplementary Materials
| # | TOPICS | READ (Ch.) | 功課 |
|---|---|---|---|
| ~~2.1-2.5, 2.4~~* | |||
| R2 | Nodal analysis, examples | 3.1-3.3 | |
| L3 | Linearity, superposition, Thevenin’s equivalences | 3.5-3.6 | |
| R3 | Thevenin and Norton equivalences | 3.5-3.6 | |
| L4 | Digital abstraction | 5.1-5.4 | HW2 |
| R4 | Boolean logic, comb. gates review, examples | 5.1-5.4, 5.6-5.7 | HW1 |
| R4a | Digital logic, gates, examples | 5.1-5.4, 5.6-5.7 | Lab1 |
| L5 | MOS switch, S and SR model, MOS gate design | 6.1-6.8 | HW3 |
| R5 | MOS switch resistor (SR) model (cont.) | 6.1-6.8 | HW2 |
| L6 | Nonlinear resistors, networks | 4.1-4.3 | |
| R6 | Static power in dig ckts, nonlinear resistors, examples | 4.1-4.3 | |
| L7 | Nonlinear resistors, small signal analysis | 4.5 | HW4 |
| R7 | Nonlinear resistors, small signal examples | 4.5 | HW3 |
| L8 | Dependent sources, analog amplification | Chapters 2.6, 7.1-7.2 | |
| R8 | Dependent sources, amplifiers, operating point analysis, biasing | Chapters 2.6, 7.1-7.2 | Lab1 |
| L9 | MOS SCS model and MOS amplifier | 7.3-7.5 | HW5 |
| R9 | Review MOS SCS model, MOS ckts, MOS amplifier | 7.3-7.5 | HW4 |
| Q1 | Quiz 1 (evening) | ||
| R9a | MOS amplifier review | 7.5 | |
| L10 | Amplifier large signal analysis | 7.6-7.7 | HW6 |
| R10 | Review 3-term device representations, amplifier input-output curves | 7.6-7.7 | HW5 |
| L11 | Amplifier small signal analysis | 8.1-8.2 | Lab2 |
| R11 | Amplifier small signal analysis examples | 8.1-8.2 | |
| L12 | Amplifier small signal circuit models | 8.2.1-8.2.4 | HW7 |
| R12 | Amplifier small signal circuit models and analysis examples | 8.2.1-8.2.4 | HW6 |
| L13 | Capacitors, first order circuits, examples | Chapters 9.1, 10.1 | |
| R13 | Inductors and their physics, first order step response, examples | 10.2 | |
| L14 | Intuitive analysis of first order systems, examples | 10.3, 10.4* | HW8 |
| R14 | Ramp, step, impulse, superposition | Chapters 9.4.2-9.4.3, 10.6 | HW7 |
| L15 | Digital memory, state | 10.5.3, 10.6.3-10.6.4* | Lab3 |
| R15 | Impulse response examples, digital memory arrays | 10.5.3, 10.6.3-10.6.4* | Lab2 |
| L16 | Transients in second order systems | 12.1 | HW9 |
| R16 | First order examplesSecond order examples | 12.1 | HW8 |
| R17 | Second order examplesSecond order systems with damping | 12.2, 12.5, 12.7* | |
| L17 | Second order systems with damping, intuitive analysis | 12.2, 12.5, 12.7* | HW10 |
| R18 | Damped second order system examplesPreview of frequency response | 12.2, 12.5, 12.7* | HW9 |
| L18 | Sinusoidal steady state analysis, frequency response | 13.1-13.2 | Lab4 |
| Q2 | Quiz 2 (evening) | ||
| L19 | Impedance methods | 13.3-13.4.2, 13.4.2* | HW11 |
| R19 | Review of impedance methods and examples | 13.3-13.4.2* | HW10 |
| L20 | Filters, Q factor, radio tuner | 13.5, 14.5 | |
| R20 | Time and frequency domain responses, Q | 13.6 | Lab3 |
| L21 | Op-amp abstraction, concept of feedback, noninverting amplifier | 15.1-15.4 | |
| R21 | Op-amp abstraction, examples and review, inverting amplifier | 15.1-15.4 | |
| L22 | Multiple inputs and superposition, integrators, differentiators | 15.5-15.6.2 | |
| R22 | First and second order op-amp filters | 15.6.3-15.6.5 | |
| L23 | Op-amp abstraction, feedback, stability, oscillators, clocking | 15.7-15.8 | |
| R23 | Special op-amp circuits | 15.5-15.8 | Lab4, HW11 |
| L24 | Energy and power | 11.1-11.3 | |
| R24 | Examples, CMOS, energy and power | 11.5 | |
| L25 | Breaking the abstraction barrier |
Full Calendar:
| # | TOPICS | READ (Ch.) | 功課 |
|---|---|---|---|
| L1 | Lumped abstraction relationship to physics, KVL, KCL | 1 | |
| R1 | KVL, KCL resistive network analysis | 2.1-2.5, 2.4* | |
| L2 | KVL, KCL example, nodal analysis | 3.1-3.3 | HW1 |
| R2 | Nodal analysis, examples | 3.1-3.3 | |
| L3 | Linearity, superposition, Thevenin’s equivalences | 3.5-3.6 | |
| R3 | Thevenin and Norton equivalences | 3.5-3.6 | |
| L4 | Digital abstraction | 5.1-5.4 | HW2 |
| R4 | Boolean logic, comb. gates review, examples | 5.1-5.4, 5.6-5.7 | HW1 |
| R4a | Digital logic, gates, examples | 5.1-5.4, 5.6-5.7 | Lab1 |
| L5 | MOS switch, S and SR model, MOS gate design | 6.1-6.8 | HW3 |
| R5 | MOS switch resistor (SR) model (cont.) | 6.1-6.8 | HW2 |
| L6 | Nonlinear resistors, networks | 4.1-4.3 | |
| R6 | Static power in dig ckts, nonlinear resistors, examples | 4.1-4.3 | |
| L7 | Nonlinear resistors, small signal analysis | 4.5 | HW4 |
| R7 | Nonlinear resistors, small signal examples | 4.5 | HW3 |
| L8 | Dependent sources, analog amplification | Chapters 2.6, 7.1-7.2 | |
| R8 | Dependent sources, amplifiers, operating point analysis, biasing | Chapters 2.6, 7.1-7.2 | Lab1 |
| L9 | MOS SCS model and MOS amplifier | 7.3-7.5 | HW5 |
| R9 | Review MOS SCS model, MOS ckts, MOS amplifier | 7.3-7.5 | HW4 |
| Q1 | Quiz 1 (evening) | ||
| R9a | MOS amplifier review | 7.5 | |
| L10 | Amplifier large signal analysis | 7.6-7.7 | HW6 |
| R10 | Review 3-term device representations, amplifier input-output curves | 7.6-7.7 | HW5 |
| L11 | Amplifier small signal analysis | 8.1-8.2 | Lab2 |
| R11 | Amplifier small signal analysis examples | 8.1-8.2 | |
| L12 | Amplifier small signal circuit models | 8.2.1-8.2.4 | HW7 |
| R12 | Amplifier small signal circuit models and analysis examples | 8.2.1-8.2.4 | HW6 |
| L13 | Capacitors, first order circuits, examples | Chapters 9.1, 10.1 | |
| R13 | Inductors and their physics, first order step response, examples | 10.2 | |
| L14 | Intuitive analysis of first order systems, examples | 10.3, 10.4* | HW8 |
| R14 | Ramp, step, impulse, superposition | Chapters 9.4.2-9.4.3, 10.6 | HW7 |
| L15 | Digital memory, state | 10.5.3, 10.6.3-10.6.4* | Lab3 |
| R15 | Impulse response examples, digital memory arrays | 10.5.3, 10.6.3-10.6.4* | Lab2 |
| L16 | Transients in second order systems | 12.1 | HW9 |
| R16 | First order examplesSecond order examples | 12.1 | HW8 |
| R17 | Second order examplesSecond order systems with damping | 12.2, 12.5, 12.7* | |
| L17 | Second order systems with damping, intuitive analysis | 12.2, 12.5, 12.7* | HW10 |
| R18 | Damped second order system examplesPreview of frequency response | 12.2, 12.5, 12.7* | HW9 |
| L18 | Sinusoidal steady state analysis, frequency response | 13.1-13.2 | Lab4 |
| Q2 | Quiz 2 (evening) | ||
| L19 | Impedance methods | 13.3-13.4.2, 13.4.2* | HW11 |
| R19 | Review of impedance methods and examples | 13.3-13.4.2* | HW10 |
| L20 | Filters, Q factor, radio tuner | 13.5, 14.5 | |
| R20 | Time and frequency domain responses, Q | 13.6 | Lab3 |
| L21 | Op-amp abstraction, concept of feedback, noninverting amplifier | 15.1-15.4 | |
| R21 | Op-amp abstraction, examples and review, inverting amplifier | 15.1-15.4 | |
| L22 | Multiple inputs and superposition, integrators, differentiators | 15.5-15.6.2 | |
| R22 | First and second order op-amp filters | 15.6.3-15.6.5 | |
| L23 | Op-amp abstraction, feedback, stability, oscillators, clocking | 15.7-15.8 |
https://www.digikey.com/en/resources/conversion-calculators/conversion-calculator-parallel-and-series-resistor